NTSB Prelim: Hawker Beechcraft Corp G36

Controller Queried The Pilot If They Were Going To Fly Down The Valley On July 3, 2021, about 1838 mountain daylight time, a Beech G36 airplane, N36JJ, was destroyed when it was involved in an accident near Aspen, Colorado. The two pilots were fatally injured. The airplane was operated under the provisions of Title 14 Code of Federal Regulations Part 91 as a personal flight. According to preliminary information, the airplane landed at the Aspen/Pitkin County Airport (ASE) about 1353 to stop for fuel and lunch. The pilots then requested an instrument flight rules (IFR) flight plan to the Des Moines International Airport (DSM), Des Moines, Iowa. The ground controller issued a clearance that included the LINDZ Nine Departure Procedure, to climb and maintain 16,000 ft, and to expect 17,000 ft, 10 minutes after departure. The pilot responded that they could not accept 16,000 ft, which was required for the departure procedure, and would instead depart using visual flight rules.

This post was originally published by Aero News GA on . Please visit the original post to read the complete article.

Leave a Reply